CentrED/Imaging/JpegLib/imjcmaster.pas

702 lines
22 KiB
Plaintext
Raw Normal View History

unit imjcmaster;
{ This file contains master control logic for the JPEG compressor.
These routines are concerned with parameter validation, initial setup,
and inter-pass control (determining the number of passes and the work
to be done in each pass). }
{ Original: jcmaster.c ; Copyright (C) 1991-1997, Thomas G. Lane. }
interface
{$I imjconfig.inc}
uses
imjmorecfg,
imjinclude,
imjdeferr,
imjerror,
imjutils,
imjpeglib;
{ Initialize master compression control. }
{GLOBAL}
procedure jinit_c_master_control (cinfo : j_compress_ptr;
transcode_only : boolean);
implementation
{ Private state }
type
c_pass_type = (
main_pass, { input data, also do first output step }
huff_opt_pass, { Huffman code optimization pass }
output_pass { data output pass }
);
type
my_master_ptr = ^my_comp_master;
my_comp_master = record
pub : jpeg_comp_master; { public fields }
pass_type : c_pass_type; { the type of the current pass }
pass_number : int; { # of passes completed }
total_passes : int; { total # of passes needed }
scan_number : int; { current index in scan_info[] }
end;
{ Support routines that do various essential calculations. }
{LOCAL}
procedure initial_setup (cinfo : j_compress_ptr);
{ Do computations that are needed before master selection phase }
var
ci : int;
compptr : jpeg_component_info_ptr;
samplesperrow : long;
jd_samplesperrow : JDIMENSION;
begin
{ Sanity check on image dimensions }
if (cinfo^.image_height <= 0) or (cinfo^.image_width <= 0) or
(cinfo^.num_components <= 0) or (cinfo^.input_components <= 0) then
ERREXIT(j_common_ptr(cinfo), JERR_EMPTY_IMAGE);
{ Make sure image isn't bigger than I can handle }
if ( long(cinfo^.image_height) > long(JPEG_MAX_DIMENSION)) or
( long(cinfo^.image_width) > long(JPEG_MAX_DIMENSION)) then
ERREXIT1(j_common_ptr(cinfo), JERR_IMAGE_TOO_BIG,
uInt(JPEG_MAX_DIMENSION));
{ Width of an input scanline must be representable as JDIMENSION. }
samplesperrow := long (cinfo^.image_width) * long (cinfo^.input_components);
jd_samplesperrow := JDIMENSION (samplesperrow);
if ( long(jd_samplesperrow) <> samplesperrow) then
ERREXIT(j_common_ptr(cinfo), JERR_WIDTH_OVERFLOW);
{ For now, precision must match compiled-in value... }
if (cinfo^.data_precision <> BITS_IN_JSAMPLE) then
ERREXIT1(j_common_ptr(cinfo), JERR_BAD_PRECISION, cinfo^.data_precision);
{ Check that number of components won't exceed internal array sizes }
if (cinfo^.num_components > MAX_COMPONENTS) then
ERREXIT2(j_common_ptr(cinfo), JERR_COMPONENT_COUNT, cinfo^.num_components,
MAX_COMPONENTS);
{ Compute maximum sampling factors; check factor validity }
cinfo^.max_h_samp_factor := 1;
cinfo^.max_v_samp_factor := 1;
compptr := jpeg_component_info_ptr(cinfo^.comp_info);
for ci := 0 to pred(cinfo^.num_components) do
begin
if (compptr^.h_samp_factor<=0) or (compptr^.h_samp_factor>MAX_SAMP_FACTOR)
or (compptr^.v_samp_factor<=0) or (compptr^.v_samp_factor>MAX_SAMP_FACTOR) then
ERREXIT(j_common_ptr(cinfo), JERR_BAD_SAMPLING);
{ MAX }
if cinfo^.max_h_samp_factor > compptr^.h_samp_factor then
cinfo^.max_h_samp_factor := cinfo^.max_h_samp_factor
else
cinfo^.max_h_samp_factor := compptr^.h_samp_factor;
{ MAX }
if cinfo^.max_v_samp_factor > compptr^.v_samp_factor then
cinfo^.max_v_samp_factor := cinfo^.max_v_samp_factor
else
cinfo^.max_v_samp_factor := compptr^.v_samp_factor;
Inc(compptr);
end;
{ Compute dimensions of components }
compptr := jpeg_component_info_ptr(cinfo^.comp_info);
for ci := 0 to pred(cinfo^.num_components) do
begin
{ Fill in the correct component_index value; don't rely on application }
compptr^.component_index := ci;
{ For compression, we never do DCT scaling. }
compptr^.DCT_scaled_size := DCTSIZE;
{ Size in DCT blocks }
compptr^.width_in_blocks := JDIMENSION (
jdiv_round_up(long (cinfo^.image_width) * long (compptr^.h_samp_factor),
long (cinfo^.max_h_samp_factor * DCTSIZE)) );
compptr^.height_in_blocks := JDIMENSION (
jdiv_round_up(long (cinfo^.image_height) * long (compptr^.v_samp_factor),
long (cinfo^.max_v_samp_factor * DCTSIZE)) );
{ Size in samples }
compptr^.downsampled_width := JDIMENSION (
jdiv_round_up(long(cinfo^.image_width) * long(compptr^.h_samp_factor),
long(cinfo^.max_h_samp_factor)) );
compptr^.downsampled_height := JDIMENSION (
jdiv_round_up(long (cinfo^.image_height) * long(compptr^.v_samp_factor),
long (cinfo^.max_v_samp_factor)) );
{ Mark component needed (this flag isn't actually used for compression) }
compptr^.component_needed := TRUE;
Inc(compptr);
end;
{ Compute number of fully interleaved MCU rows (number of times that
main controller will call coefficient controller). }
cinfo^.total_iMCU_rows := JDIMENSION (
jdiv_round_up(long (cinfo^.image_height),
long (cinfo^.max_v_samp_factor*DCTSIZE)) );
end;
{$ifdef C_MULTISCAN_FILES_SUPPORTED}
{LOCAL}
procedure validate_script (cinfo : j_compress_ptr);
{ Verify that the scan script in cinfo^.scan_info[] is valid; also
determine whether it uses progressive JPEG, and set cinfo^.progressive_mode. }
type
IntRow = array[0..DCTSIZE2-1] of int;
introw_ptr = ^IntRow;
var
{const}scanptr : jpeg_scan_info_ptr;
scanno, ncomps, ci, coefi, thisi : int;
Ss, Se, Ah, Al : int;
component_sent : array[0..MAX_COMPONENTS-1] of boolean;
{$ifdef C_PROGRESSIVE_SUPPORTED}
last_bitpos_int_ptr : int_ptr;
last_bitpos_ptr : introw_ptr;
last_bitpos : array[0..MAX_COMPONENTS-1] of IntRow;
{ -1 until that coefficient has been seen; then last Al for it }
{ The JPEG spec simply gives the ranges 0..13 for Ah and Al, but that
seems wrong: the upper bound ought to depend on data precision.
Perhaps they really meant 0..N+1 for N-bit precision.
Here we allow 0..10 for 8-bit data; Al larger than 10 results in
out-of-range reconstructed DC values during the first DC scan,
which might cause problems for some decoders. }
{$ifdef BITS_IN_JSAMPLE_IS_8}
const
MAX_AH_AL = 10;
{$else}
const
MAX_AH_AL = 13;
{$endif}
{$endif}
begin
if (cinfo^.num_scans <= 0) then
ERREXIT1(j_common_ptr(cinfo), JERR_BAD_SCAN_SCRIPT, 0);
{ For sequential JPEG, all scans must have Ss=0, Se=DCTSIZE2-1;
for progressive JPEG, no scan can have this. }
scanptr := cinfo^.scan_info;
if (scanptr^.Ss <> 0) or (scanptr^.Se <> DCTSIZE2-1) then
begin
{$ifdef C_PROGRESSIVE_SUPPORTED}
cinfo^.progressive_mode := TRUE;
last_bitpos_int_ptr := @(last_bitpos[0][0]);
for ci := 0 to pred(cinfo^.num_components) do
for coefi := 0 to pred(DCTSIZE2) do
begin
last_bitpos_int_ptr^ := -1;
Inc(last_bitpos_int_ptr);
end;
{$else}
ERREXIT(j_common_ptr(cinfo), JERR_NOT_COMPILED);
{$endif}
end
else
begin
cinfo^.progressive_mode := FALSE;
for ci := 0 to pred(cinfo^.num_components) do
component_sent[ci] := FALSE;
end;
for scanno := 1 to cinfo^.num_scans do
begin
{ Validate component indexes }
ncomps := scanptr^.comps_in_scan;
if (ncomps <= 0) or (ncomps > MAX_COMPS_IN_SCAN) then
ERREXIT2(j_common_ptr(cinfo), JERR_COMPONENT_COUNT, ncomps, MAX_COMPS_IN_SCAN);
for ci := 0 to pred(ncomps) do
begin
thisi := scanptr^.component_index[ci];
if (thisi < 0) or (thisi >= cinfo^.num_components) then
ERREXIT1(j_common_ptr(cinfo), JERR_BAD_SCAN_SCRIPT, scanno);
{ Components must appear in SOF order within each scan }
if (ci > 0) and (thisi <= scanptr^.component_index[ci-1]) then
ERREXIT1(j_common_ptr(cinfo), JERR_BAD_SCAN_SCRIPT, scanno);
end;
{ Validate progression parameters }
Ss := scanptr^.Ss;
Se := scanptr^.Se;
Ah := scanptr^.Ah;
Al := scanptr^.Al;
if (cinfo^.progressive_mode) then
begin
{$ifdef C_PROGRESSIVE_SUPPORTED}
if (Ss < 0) or (Ss >= DCTSIZE2) or (Se < Ss) or (Se >= DCTSIZE2) or
(Ah < 0) or (Ah > MAX_AH_AL) or (Al < 0) or (Al > MAX_AH_AL) then
ERREXIT1(j_common_ptr(cinfo), JERR_BAD_PROG_SCRIPT, scanno);
if (Ss < 0) or (Ss >= DCTSIZE2) or (Se < Ss) or (Se >= DCTSIZE2)
or (Ah < 0) or (Ah > MAX_AH_AL) or (Al < 0) or (Al > MAX_AH_AL) then
ERREXIT1(j_common_ptr(cinfo), JERR_BAD_PROG_SCRIPT, scanno);
if (Ss = 0) then
begin
if (Se <> 0) then { DC and AC together not OK }
ERREXIT1(j_common_ptr(cinfo), JERR_BAD_PROG_SCRIPT, scanno);
end
else
begin
if (ncomps <> 1) then { AC scans must be for only one component }
ERREXIT1(j_common_ptr(cinfo), JERR_BAD_PROG_SCRIPT, scanno);
end;
for ci := 0 to pred(ncomps) do
begin
last_bitpos_ptr := @( last_bitpos[scanptr^.component_index[ci]]);
if (Ss <> 0) and (last_bitpos_ptr^[0] < 0) then { AC without prior DC scan }
ERREXIT1(j_common_ptr(cinfo), JERR_BAD_PROG_SCRIPT, scanno);
for coefi := Ss to Se do
begin
if (last_bitpos_ptr^[coefi] < 0) then
begin
{ first scan of this coefficient }
if (Ah <> 0) then
ERREXIT1(j_common_ptr(cinfo), JERR_BAD_PROG_SCRIPT, scanno);
end
else
begin
{ not first scan }
if (Ah <> last_bitpos_ptr^[coefi]) or (Al <> Ah-1) then
ERREXIT1(j_common_ptr(cinfo), JERR_BAD_PROG_SCRIPT, scanno);
end;
last_bitpos_ptr^[coefi] := Al;
end;
end;
{$endif}
end
else
begin
{ For sequential JPEG, all progression parameters must be these: }
if (Ss <> 0) or (Se <> DCTSIZE2-1) or (Ah <> 0) or (Al <> 0) then
ERREXIT1(j_common_ptr(cinfo), JERR_BAD_PROG_SCRIPT, scanno);
{ Make sure components are not sent twice }
for ci := 0 to pred(ncomps) do
begin
thisi := scanptr^.component_index[ci];
if (component_sent[thisi]) then
ERREXIT1(j_common_ptr(cinfo), JERR_BAD_SCAN_SCRIPT, scanno);
component_sent[thisi] := TRUE;
end;
end;
Inc(scanptr);
end;
{ Now verify that everything got sent. }
if (cinfo^.progressive_mode) then
begin
{$ifdef C_PROGRESSIVE_SUPPORTED}
{ For progressive mode, we only check that at least some DC data
got sent for each component; the spec does not require that all bits
of all coefficients be transmitted. Would it be wiser to enforce
transmission of all coefficient bits?? }
for ci := 0 to pred(cinfo^.num_components) do
begin
if (last_bitpos[ci][0] < 0) then
ERREXIT(j_common_ptr(cinfo), JERR_MISSING_DATA);
end;
{$endif}
end
else
begin
for ci := 0 to pred(cinfo^.num_components) do
begin
if (not component_sent[ci]) then
ERREXIT(j_common_ptr(cinfo), JERR_MISSING_DATA);
end;
end;
end;
{$endif} { C_MULTISCAN_FILES_SUPPORTED }
{LOCAL}
procedure select_scan_parameters (cinfo : j_compress_ptr);
{ Set up the scan parameters for the current scan }
var
master : my_master_ptr;
{const} scanptr : jpeg_scan_info_ptr;
ci : int;
var
comp_infos : jpeg_component_info_list_ptr;
begin
{$ifdef C_MULTISCAN_FILES_SUPPORTED}
if (cinfo^.scan_info <> NIL) then
begin
{ Prepare for current scan --- the script is already validated }
master := my_master_ptr (cinfo^.master);
scanptr := cinfo^.scan_info;
Inc(scanptr, master^.scan_number);
cinfo^.comps_in_scan := scanptr^.comps_in_scan;
comp_infos := cinfo^.comp_info;
for ci := 0 to pred(scanptr^.comps_in_scan) do
begin
cinfo^.cur_comp_info[ci] :=
@(comp_infos^[scanptr^.component_index[ci]]);
end;
cinfo^.Ss := scanptr^.Ss;
cinfo^.Se := scanptr^.Se;
cinfo^.Ah := scanptr^.Ah;
cinfo^.Al := scanptr^.Al;
end
else
{$endif}
begin
{ Prepare for single sequential-JPEG scan containing all components }
if (cinfo^.num_components > MAX_COMPS_IN_SCAN) then
ERREXIT2(j_common_ptr(cinfo), JERR_COMPONENT_COUNT, cinfo^.num_components,
MAX_COMPS_IN_SCAN);
cinfo^.comps_in_scan := cinfo^.num_components;
comp_infos := cinfo^.comp_info;
for ci := 0 to pred(cinfo^.num_components) do
begin
cinfo^.cur_comp_info[ci] := @(comp_infos^[ci]);
end;
cinfo^.Ss := 0;
cinfo^.Se := DCTSIZE2-1;
cinfo^.Ah := 0;
cinfo^.Al := 0;
end;
end;
{LOCAL}
procedure per_scan_setup (cinfo : j_compress_ptr);
{ Do computations that are needed before processing a JPEG scan }
{ cinfo^.comps_in_scan and cinfo^.cur_comp_info[] are already set }
var
ci, mcublks, tmp : int;
compptr : jpeg_component_info_ptr;
nominal : long;
begin
if (cinfo^.comps_in_scan = 1) then
begin
{ Noninterleaved (single-component) scan }
compptr := cinfo^.cur_comp_info[0];
{ Overall image size in MCUs }
cinfo^.MCUs_per_row := compptr^.width_in_blocks;
cinfo^.MCU_rows_in_scan := compptr^.height_in_blocks;
{ For noninterleaved scan, always one block per MCU }
compptr^.MCU_width := 1;
compptr^.MCU_height := 1;
compptr^.MCU_blocks := 1;
compptr^.MCU_sample_width := DCTSIZE;
compptr^.last_col_width := 1;
{ For noninterleaved scans, it is convenient to define last_row_height
as the number of block rows present in the last iMCU row. }
tmp := int (compptr^.height_in_blocks) mod compptr^.v_samp_factor;
if (tmp = 0) then
tmp := compptr^.v_samp_factor;
compptr^.last_row_height := tmp;
{ Prepare array describing MCU composition }
cinfo^.blocks_in_MCU := 1;
cinfo^.MCU_membership[0] := 0;
end
else
begin
{ Interleaved (multi-component) scan }
if (cinfo^.comps_in_scan <= 0) or
(cinfo^.comps_in_scan > MAX_COMPS_IN_SCAN) then
ERREXIT2(j_common_ptr(cinfo), JERR_COMPONENT_COUNT,
cinfo^.comps_in_scan, MAX_COMPS_IN_SCAN);
{ Overall image size in MCUs }
cinfo^.MCUs_per_row := JDIMENSION (
jdiv_round_up( long (cinfo^.image_width),
long (cinfo^.max_h_samp_factor*DCTSIZE)) );
cinfo^.MCU_rows_in_scan := JDIMENSION (
jdiv_round_up( long (cinfo^.image_height),
long (cinfo^.max_v_samp_factor*DCTSIZE)) );
cinfo^.blocks_in_MCU := 0;
for ci := 0 to pred(cinfo^.comps_in_scan) do
begin
compptr := cinfo^.cur_comp_info[ci];
{ Sampling factors give # of blocks of component in each MCU }
compptr^.MCU_width := compptr^.h_samp_factor;
compptr^.MCU_height := compptr^.v_samp_factor;
compptr^.MCU_blocks := compptr^.MCU_width * compptr^.MCU_height;
compptr^.MCU_sample_width := compptr^.MCU_width * DCTSIZE;
{ Figure number of non-dummy blocks in last MCU column & row }
tmp := int (compptr^.width_in_blocks) mod compptr^.MCU_width;
if (tmp = 0) then
tmp := compptr^.MCU_width;
compptr^.last_col_width := tmp;
tmp := int (compptr^.height_in_blocks) mod compptr^.MCU_height;
if (tmp = 0) then
tmp := compptr^.MCU_height;
compptr^.last_row_height := tmp;
{ Prepare array describing MCU composition }
mcublks := compptr^.MCU_blocks;
if (cinfo^.blocks_in_MCU + mcublks > C_MAX_BLOCKS_IN_MCU) then
ERREXIT(j_common_ptr(cinfo), JERR_BAD_MCU_SIZE);
while (mcublks > 0) do
begin
Dec(mcublks);
cinfo^.MCU_membership[cinfo^.blocks_in_MCU] := ci;
Inc(cinfo^.blocks_in_MCU);
end;
end;
end;
{ Convert restart specified in rows to actual MCU count. }
{ Note that count must fit in 16 bits, so we provide limiting. }
if (cinfo^.restart_in_rows > 0) then
begin
nominal := long(cinfo^.restart_in_rows) * long(cinfo^.MCUs_per_row);
if nominal < long(65535) then
cinfo^.restart_interval := uInt (nominal)
else
cinfo^.restart_interval := long(65535);
end;
end;
{ Per-pass setup.
This is called at the beginning of each pass. We determine which modules
will be active during this pass and give them appropriate start_pass calls.
We also set is_last_pass to indicate whether any more passes will be
required. }
{METHODDEF}
procedure prepare_for_pass (cinfo : j_compress_ptr);
var
master : my_master_ptr;
var
fallthrough : boolean;
begin
master := my_master_ptr (cinfo^.master);
fallthrough := true;
case (master^.pass_type) of
main_pass:
begin
{ Initial pass: will collect input data, and do either Huffman
optimization or data output for the first scan. }
select_scan_parameters(cinfo);
per_scan_setup(cinfo);
if (not cinfo^.raw_data_in) then
begin
cinfo^.cconvert^.start_pass (cinfo);
cinfo^.downsample^.start_pass (cinfo);
cinfo^.prep^.start_pass (cinfo, JBUF_PASS_THRU);
end;
cinfo^.fdct^.start_pass (cinfo);
cinfo^.entropy^.start_pass (cinfo, cinfo^.optimize_coding);
if master^.total_passes > 1 then
cinfo^.coef^.start_pass (cinfo, JBUF_SAVE_AND_PASS)
else
cinfo^.coef^.start_pass (cinfo, JBUF_PASS_THRU);
cinfo^.main^.start_pass (cinfo, JBUF_PASS_THRU);
if (cinfo^.optimize_coding) then
begin
{ No immediate data output; postpone writing frame/scan headers }
master^.pub.call_pass_startup := FALSE;
end
else
begin
{ Will write frame/scan headers at first jpeg_write_scanlines call }
master^.pub.call_pass_startup := TRUE;
end;
end;
{$ifdef ENTROPY_OPT_SUPPORTED}
huff_opt_pass,
output_pass:
begin
if (master^.pass_type = huff_opt_pass) then
begin
{ Do Huffman optimization for a scan after the first one. }
select_scan_parameters(cinfo);
per_scan_setup(cinfo);
if (cinfo^.Ss <> 0) or (cinfo^.Ah = 0) or (cinfo^.arith_code) then
begin
cinfo^.entropy^.start_pass (cinfo, TRUE);
cinfo^.coef^.start_pass (cinfo, JBUF_CRANK_DEST);
master^.pub.call_pass_startup := FALSE;
fallthrough := false;
end;
{ Special case: Huffman DC refinement scans need no Huffman table
and therefore we can skip the optimization pass for them. }
if fallthrough then
begin
master^.pass_type := output_pass;
Inc(master^.pass_number);
{FALLTHROUGH}
end;
end;
{$else}
output_pass:
begin
{$endif}
if fallthrough then
begin
{ Do a data-output pass. }
{ We need not repeat per-scan setup if prior optimization pass did it. }
if (not cinfo^.optimize_coding) then
begin
select_scan_parameters(cinfo);
per_scan_setup(cinfo);
end;
cinfo^.entropy^.start_pass (cinfo, FALSE);
cinfo^.coef^.start_pass (cinfo, JBUF_CRANK_DEST);
{ We emit frame/scan headers now }
if (master^.scan_number = 0) then
cinfo^.marker^.write_frame_header (cinfo);
cinfo^.marker^.write_scan_header (cinfo);
master^.pub.call_pass_startup := FALSE;
end;
end;
else
ERREXIT(j_common_ptr(cinfo), JERR_NOT_COMPILED);
end;
master^.pub.is_last_pass := (master^.pass_number = master^.total_passes-1);
{ Set up progress monitor's pass info if present }
if (cinfo^.progress <> NIL) then
begin
cinfo^.progress^.completed_passes := master^.pass_number;
cinfo^.progress^.total_passes := master^.total_passes;
end;
end;
{ Special start-of-pass hook.
This is called by jpeg_write_scanlines if call_pass_startup is TRUE.
In single-pass processing, we need this hook because we don't want to
write frame/scan headers during jpeg_start_compress; we want to let the
application write COM markers etc. between jpeg_start_compress and the
jpeg_write_scanlines loop.
In multi-pass processing, this routine is not used. }
{METHODDEF}
procedure pass_startup (cinfo : j_compress_ptr);
begin
cinfo^.master^.call_pass_startup := FALSE; { reset flag so call only once }
cinfo^.marker^.write_frame_header (cinfo);
cinfo^.marker^.write_scan_header (cinfo);
end;
{ Finish up at end of pass. }
{METHODDEF}
procedure finish_pass_master (cinfo : j_compress_ptr);
var
master : my_master_ptr;
begin
master := my_master_ptr (cinfo^.master);
{ The entropy coder always needs an end-of-pass call,
either to analyze statistics or to flush its output buffer. }
cinfo^.entropy^.finish_pass (cinfo);
{ Update state for next pass }
case (master^.pass_type) of
main_pass:
begin
{ next pass is either output of scan 0 (after optimization)
or output of scan 1 (if no optimization). }
master^.pass_type := output_pass;
if (not cinfo^.optimize_coding) then
Inc(master^.scan_number);
end;
huff_opt_pass:
{ next pass is always output of current scan }
master^.pass_type := output_pass;
output_pass:
begin
{ next pass is either optimization or output of next scan }
if (cinfo^.optimize_coding) then
master^.pass_type := huff_opt_pass;
Inc(master^.scan_number);
end;
end;
Inc(master^.pass_number);
end;
{ Initialize master compression control. }
{GLOBAL}
procedure jinit_c_master_control (cinfo : j_compress_ptr;
transcode_only : boolean);
var
master : my_master_ptr;
begin
master := my_master_ptr(
cinfo^.mem^.alloc_small (j_common_ptr(cinfo), JPOOL_IMAGE,
SIZEOF(my_comp_master)) );
cinfo^.master := jpeg_comp_master_ptr(master);
master^.pub.prepare_for_pass := prepare_for_pass;
master^.pub.pass_startup := pass_startup;
master^.pub.finish_pass := finish_pass_master;
master^.pub.is_last_pass := FALSE;
{ Validate parameters, determine derived values }
initial_setup(cinfo);
if (cinfo^.scan_info <> NIL) then
begin
{$ifdef C_MULTISCAN_FILES_SUPPORTED}
validate_script(cinfo);
{$else}
ERREXIT(j_common_ptr(cinfo), JERR_NOT_COMPILED);
{$endif}
end
else
begin
cinfo^.progressive_mode := FALSE;
cinfo^.num_scans := 1;
end;
if (cinfo^.progressive_mode) then { TEMPORARY HACK ??? }
cinfo^.optimize_coding := TRUE; { assume default tables no good for progressive mode }
{ Initialize my private state }
if (transcode_only) then
begin
{ no main pass in transcoding }
if (cinfo^.optimize_coding) then
master^.pass_type := huff_opt_pass
else
master^.pass_type := output_pass;
end
else
begin
{ for normal compression, first pass is always this type: }
master^.pass_type := main_pass;
end;
master^.scan_number := 0;
master^.pass_number := 0;
if (cinfo^.optimize_coding) then
master^.total_passes := cinfo^.num_scans * 2
else
master^.total_passes := cinfo^.num_scans;
end;
end.